Electrical Fire Hazard Remediation
Electrical fires often start from small, unnoticed faults that build up over time. Electrical fire hazard remediation is the process of finding and fixing these risks before they turn into a fire, protecting both property and lives.
Why This Service Matters
Many house fires are caused by faulty wiring, overloaded circuits, damaged insulation, or old electrical systems that were never upgraded. Electrical fire hazard remediation looks at the whole electrical system in a home, not just one point, to identify anything that could lead to overheating or arcing. This is especially important in older homes or houses that have had unofficial wiring work done in the past.
What to Expect During the Service
- Full Home Assessment – The electrician inspects the distribution board, wiring, sockets, and switches throughout the house.
- Load Analysis – Current usage is checked against the capacity of the wiring and breakers to spot overloading.
- Insulation Check – Cables are checked for cracked, brittle, or chewed insulation.
- Hazard Identification – Problem areas such as old wiring, unsafe joints, or missing earthing are listed.
- Remediation Work – Identified hazards are fixed, which may include rewiring sections, replacing breakers, or improving earthing.
- Final Safety Report – A written report is given showing what was found and what was corrected.
Thorough electrical fire hazard remediation should always include a check of the distribution board, since many fire hazards start there due to overloaded breakers or poor connections.
Common Fire Hazards in Homes
Overloaded extension cables, old wiring with cracked insulation, missing or faulty earthing, and DIY wiring done without proper standards are some of the most common hazards found during this process.
Estimated Cost of Electrical Fire Hazard Remediation
| Service | Estimated Cost (KES) |
|---|---|
| Full home electrical safety assessment | 5,000 – 12,000 |
| Distribution board upgrade | 15,000 – 40,000 |
| Rewiring of hazardous sections | 20,000 – 80,000 |
| Earthing system installation or repair | 8,000 – 20,000 |
| Overloaded circuit correction | 5,000 – 15,000 |
| Final safety inspection and report | 3,000 – 7,000 |
Costs depend on the size of the house and the number of hazards found.
Final Thoughts
Electrical fire hazard remediation is one of the most important services for older homes or houses with a history of electrical problems. Catching hazards early is far cheaper, and much safer, than dealing with fire damage later.