Radio Servicing in Nairobi – Professional Radio Repair and Maintenance 0713254375

Looking for radio servicing in Nairobi? Pro-Logic Technologies Limited provides professional radio repair, troubleshooting, maintenance and electronic component-level servicing for customers who need their radios restored to proper working condition.

Radios remain useful for entertainment, news, music, communication and public information. Although many modern homes now rely on smartphones, smart televisions and internet-based platforms, traditional radios and modern audio systems are still widely used in homes, businesses, offices, workshops, vehicles and institutions.

When a radio develops a fault, replacing the entire unit is not always necessary. A qualified electronics technician can inspect the equipment, identify the failed section and determine whether the problem can be repaired economically.

At Pro-Logic Technologies Limited, we approach radio servicing as an electronic diagnosis process rather than simply replacing visible components. Problems involving power supplies, speakers, amplifiers, tuning circuits, switches, capacitors, connectors, circuit boards and other electronic sections require proper testing before repair.

For radio servicing in Nairobi, contact Pro-Logic Technologies Limited on 0723 763 173.

Professional Radio Servicing in Nairobi

Radio faults can range from simple mechanical problems to complex circuit-board failures.

A radio may:

Fail to switch on
Switch on but produce no sound
Produce distorted audio
Have very low volume
Produce intermittent sound
Fail to tune stations
Have poor FM reception
Have poor AM reception
Produce static noise
Lose stations
Have a damaged antenna
Have a broken tuning knob
Have faulty buttons
Have a defective volume control
Develop power-supply problems
Have a damaged speaker
Experience battery problems
Have a damaged charging circuit
Develop PCB faults
Experience overheating
Shut down unexpectedly

Some faults can be identified quickly, while others require detailed electronic testing.

Our objective is to identify the actual cause before recommending a repair.

Radio Repair Services in Nairobi

Pro-Logic Technologies Limited can assist customers with a wide range of radio-related electronic problems.

Our service scope can include:

Radio diagnosis
Radio servicing
Radio repair
Radio maintenance
Power fault diagnosis
Audio fault diagnosis
Speaker replacement
Speaker repair
Amplifier circuit repair
Power supply repair
Capacitor replacement
Resistor replacement
Diode replacement
Transistor replacement
Integrated circuit troubleshooting
PCB repair
Connector repair
Switch replacement
Volume-control repair
Tuning-control repair
Antenna repair
Battery-related repairs
Charging-circuit diagnosis
Loose connection repair
Soldering
Corrosion inspection
Internal cleaning
Component-level troubleshooting

The exact service depends on the make, model, design and condition of the radio.

Radio Servicing for Different Types of Radios

Different radio designs require different troubleshooting approaches.

We can assess various types of equipment, including:

AM Radios

AM radios use a different reception architecture from FM receivers. Problems may involve the antenna, tuning circuit, oscillator, intermediate-frequency section, detector or audio stage.

FM Radios

FM receivers can experience reception problems caused by antenna faults, tuner problems, alignment issues, signal-path faults or damaged components.

AM/FM Radios

Many household radios support both AM and FM. A fault affecting one band but not the other can provide useful information during diagnosis.

Portable Radios

Battery-powered radios can develop problems involving:

Battery contacts
Charging circuits
Power switches
Speaker connections
Volume controls
Internal wiring
DC input sockets

Rechargeable Radios

Rechargeable units may have faults involving the battery, charging circuit, USB input, charging controller or power-management circuitry.

Mains-Powered Radios

Mains-operated radios can experience faults in:

Power cords
Fuses
Transformers
Rectifier circuits
Capacitors
Voltage regulators
Power switches
Internal power supplies

Vintage Radios

Older radios may require additional care because components can be aged, discontinued or mechanically worn.

Radio Not Switching On in Nairobi

One of the most common reasons customers seek radio servicing is complete power failure.

You press the power button and nothing happens.

There may be no display, no sound and no indicator light.

The problem could be caused by a relatively simple component or a deeper circuit failure.

Possible causes include:

Damaged power cable
Blown fuse
Faulty power switch
Failed transformer
Bad rectifier
Failed capacitor
Voltage regulator fault
Broken PCB track
Loose connection
Damaged battery
Charging circuit failure

Replacing a fuse without identifying why it failed is not always appropriate.

A technician should determine whether the fuse failure resulted from a genuine overload or a short circuit elsewhere in the equipment.

Radio Turns On but Has No Sound

Another common complaint is:

“The radio powers on, but there is no sound.”

This type of fault requires testing through the audio signal path.

Potential causes include:

Faulty speaker
Broken speaker wire
Failed audio amplifier
Damaged volume control
Muting circuit fault
Bad coupling capacitor
PCB fault
Headphone socket problem
Fault in the tuner or detector stage

The presence of power does not necessarily mean that the entire radio is functioning.

A technician can trace the audio path to determine where the signal is being lost.

Radio Has Very Low Volume

If a radio still produces sound but the volume is unusually low, several components may need inspection.

Possible causes include:

Weak speaker
Damaged speaker cone
Faulty amplifier
Poor power supply
Bad electrolytic capacitors
Dirty volume control
Loose connection
Audio-stage component failure

The solution depends on the diagnosis.

Cleaning a control may solve one fault, while a failed amplifier IC may require component replacement.

Distorted Radio Sound

Distortion can make music or speech unpleasant to listen to.

A distorted signal may sound:

Crackling
Harsh
Muffled
Buzzing
Weak
Broken
Overdriven

Potential causes include:

Damaged speaker
Faulty amplifier
Power-supply ripple
Failed capacitors
Poor solder joint
Incorrect biasing
Damaged audio component
Loose connection

A technician should determine whether distortion originates in the audio source, amplifier or speaker.

Radio Producing Static Noise

Static or unwanted noise can have several causes.

The technician may investigate:

Antenna condition
Tuning circuit
Power supply
Grounding
Internal interference
Damaged components
Loose connections
Radio-frequency section

The first step is to determine whether the noise is present across all stations or only particular frequencies.

This can help narrow the fault.

Radio Cannot Tune Stations

If a radio switches on and produces audio noise but cannot locate stations properly, the tuning system requires inspection.

Possible problems include:

Faulty tuning control
Damaged tuning mechanism
Antenna problem
Tuner circuit failure
Oscillator fault
Alignment issue
PCB damage

Mechanical tuning systems may also become difficult to operate due to worn controls or damaged internal mechanisms.

FM Radio Reception Problems

Poor FM reception can be frustrating when the radio otherwise appears functional.

The problem may originate from:

Antenna
Antenna connector
RF circuit
Tuner
Oscillator
Signal-processing section
Damaged PCB
Component failure

The technician can test the radio to distinguish between an external reception issue and an internal fault.

AM Radio Repair

AM radio reception uses a different signal-processing arrangement from FM.

Faults can occur in:

Antenna circuit
Oscillator
Mixer
IF amplifier
Detector
Audio amplifier

For older equipment, component ageing may also affect performance.

Radio Speaker Replacement

The speaker is one of the most important parts of a radio's audio system.

A speaker can become damaged through:

Age
Excessive volume
Mechanical damage
Moisture
Heat
Electrical overload
Physical impact

Symptoms may include:

Rattling
Crackling
Weak sound
No sound
Distortion

Where replacement is necessary, the replacement speaker should be appropriately matched to the radio's electrical and physical requirements.

Radio Amplifier Repair

The amplifier converts the relatively small audio signal into a level capable of driving the speaker.

An amplifier fault can result in:

No sound
Weak sound
Distortion
Intermittent audio
Excessive heat

Amplifier circuits may use discrete transistors or integrated circuits.

Component-level diagnosis can determine which part of the amplifier stage has failed.

Radio Power Supply Repair

The power supply is fundamental to reliable operation.

Depending on the radio design, it may contain:

Transformer
Rectifier
Diodes
Capacitors
Regulators
Resistors
Protection components
Switching circuitry

Power-supply faults can affect the entire radio.

In some cases, excessive voltage ripple can cause audio hum, instability or intermittent operation.

Capacitor Replacement in Radios

Capacitors are commonly used throughout electronic equipment.

With age, some capacitors can deteriorate.

Symptoms may include:

Hum
Low volume
Distortion
Power instability
Failure to start
Intermittent operation

Testing helps determine whether capacitor replacement is appropriate.

Radio PCB Repair in Nairobi

Modern radios contain printed circuit boards carrying numerous electronic components.

A PCB can develop:

Burnt components
Cracked solder joints
Broken tracks
Corrosion
Short circuits
Damaged connectors
Failed ICs
Component-level faults

PCB repair requires careful diagnosis.

Blindly replacing a circuit board may be unnecessarily expensive when a damaged component can be repaired.

Component-Level Radio Repair

At component level, technicians may troubleshoot:

Resistors
Capacitors
Diodes
Transistors
ICs
Regulators
Inductors
Coils
Switches
Connectors
Potentiometers

The objective is to identify the defective section and restore normal operation where practical.

Radio Volume Knob Repair

A radio's volume control can develop crackling, intermittent operation or complete failure.

A faulty potentiometer may cause the volume to:

Jump suddenly
Cut out
Remain low
Remain high
Produce noise while turning

The control can be inspected and, where necessary, repaired or replaced.

Radio Tuning Knob Repair

Mechanical tuning controls can become damaged after years of use.

A knob may spin without changing the station, become loose or become difficult to turn.

Depending on the design, the fault may involve:

Knob
Shaft
Gear mechanism
Tuning capacitor
Encoder
Internal linkage

The appropriate repair depends on the radio design.

Radio Antenna Repair

A damaged antenna can significantly affect reception.

Common problems include:

Broken telescopic antenna
Loose antenna connection
Damaged antenna socket
Broken internal wire
Corrosion

A replacement antenna may be fitted where compatible.

Radio Charging Problems

Rechargeable radios may stop charging because of:

Faulty charging socket
Damaged cable
Failed charging IC
Bad battery
Broken PCB track
Protection circuit fault
Poor electrical connection

The technician should distinguish between a defective battery and a defective charging system.

Replacing the battery alone may not solve a charging-circuit problem.

Radio Battery Replacement

Rechargeable batteries eventually lose capacity.

A battery may:

Discharge quickly
Fail to hold charge
Become swollen
Stop charging
Cause the radio to shut down unexpectedly

Battery replacement should use a compatible specification.

Improper battery installation can damage the radio or create safety risks.

Radio Maintenance Services

Servicing does not always have to wait until equipment completely fails.

Preventive maintenance can include:

Internal inspection
Dust removal
Connector inspection
Switch inspection
Control cleaning
Speaker inspection
Battery inspection
Power-supply assessment
PCB inspection
General functional testing

Maintenance can help identify developing problems before they become major failures.

Cleaning a Radio

Dust can accumulate inside electronic equipment.

Excessive dust can contribute to:

Poor ventilation
Overheating
Switch contamination
Connector problems
Component contamination

Internal cleaning should be performed carefully because aggressive cleaning can damage delicate components.

Water and Moisture Damage to Radios

Radios exposed to moisture may develop:

Corrosion
Short circuits
Oxidized contacts
Speaker damage
PCB damage
Power faults

A wet radio should not simply be switched on repeatedly.

The equipment should be inspected and assessed for internal damage.

Radio Repair After Power Surge

Electrical surges can damage electronic equipment.

A radio exposed to an electrical surge may develop:

Complete power failure
Distorted sound
Failed power supply
Damaged ICs
Burnt components
Intermittent operation

The power section should be inspected before attempting normal operation.

Radio Repair After Lightning Damage

Lightning-related electrical surges can cause extensive damage.

Affected sections may include:

Power supply
Antenna circuit
Tuner
Amplifier
PCB
Input/output circuits

The extent of damage determines whether repair is economically practical.

Vintage Radio Servicing in Nairobi

Older radios can have significant sentimental and historical value.

A vintage radio may require attention to:

Aged capacitors
Mechanical controls
Speaker deterioration
Wiring
Switches
Power supply
Tuning mechanisms

The objective may be restoration rather than simply replacing the equipment.

Restoring an Old Radio

Restoration can involve several stages.

The radio may first be examined externally before being opened for internal inspection.

The technician can then identify:

Missing components
Damaged wiring
Corroded areas
Failed components
Speaker condition
Power-supply condition
Mechanical problems

The restoration strategy should be agreed upon according to the radio's condition and value.

Car Radio and Audio Equipment Servicing

Some customers use the term radio to describe vehicle audio equipment.

Car audio faults can involve:

Head units
Speakers
Amplifiers
Wiring
Power connections
Antennas
Bluetooth modules
USB inputs

Vehicle audio systems may require a different diagnostic approach from household radios.

Radio Servicing for Businesses

Businesses may rely on audio equipment for:

Background music
Customer entertainment
Announcements
Communication
Public information

A faulty radio or audio unit can therefore affect normal operations.

Scheduled maintenance can reduce unexpected equipment downtime.

Radio Repair for Institutions

Institutions may have several audio devices requiring maintenance.

These can include:

Radios
Amplifiers
Public-address systems
Speakers
Recorders
Audio accessories

A systematic repair and maintenance approach can be more efficient than treating each fault independently.

Radio Servicing for Workshops and Technicians

Radio equipment can also be used in technical environments.

If a radio is used continuously, component wear and dust accumulation can be greater.

Regular servicing can help maintain reliability.

Professional Radio Diagnosis

Good repair begins with diagnosis.

Rather than assuming the fault, a technician can examine the equipment systematically.

A typical diagnostic sequence may involve:

Visual inspection
Power-supply testing
Current-consumption assessment
Control inspection
Audio testing
Signal-path testing
Component testing
PCB inspection
Fault isolation
Repair recommendation

This process helps prevent unnecessary parts replacement.

Why Proper Diagnosis Matters

Two radios may have the same symptom but completely different causes.

For example, two radios that do not produce sound could have:

One faulty speaker
One failed amplifier

The visible symptom is identical.

The repair is not.

Proper diagnosis is therefore important when controlling repair costs and avoiding unnecessary replacements.

Radio Repair Parts

Depending on the equipment, repairs may require components such as:

Speakers
Capacitors
Resistors
Diodes
Transistors
Integrated circuits
Switches
Potentiometers
Antennas
Connectors
Cables
Fuses
Transformers
Regulators

Availability depends on the model and component.

Some older or discontinued radios may require compatible alternatives.

Genuine and Compatible Replacement Components

The replacement part should meet the radio's requirements.

Important specifications can include:

Voltage
Current
Resistance
Capacitance
Power rating
Frequency characteristics
Physical dimensions
Connector configuration

Using an unsuitable component can create additional faults.

Radio Servicing Cost in Nairobi

There is no single price for radio repair.

The final cost depends on the fault, radio model, parts required and amount of labour involved.

A simple switch or connection fault may cost considerably less than a major PCB or amplifier repair.

Before proceeding with substantial repair work, customers can request an assessment and quotation.

What Determines Radio Repair Cost?

Factors may include:

Type of Fault

A simple loose connection is different from a failed circuit board.

Radio Model

Some equipment uses readily available components while others require specialized parts.

Spare Parts

The price of replacement components can vary.

Labour

Complex component-level repairs require more diagnostic and repair time.

Condition

A severely damaged radio may require multiple repairs.

Availability

Older equipment can require additional effort to source compatible parts.

Do Not Replace a Radio Too Quickly

A radio that has stopped working is not automatically beyond repair.

Before purchasing a replacement, consider having it diagnosed.

A repair may be practical if:

The cabinet is in good condition
The speaker is usable
Major boards are repairable
Replacement parts are available
The equipment has sentimental value
The repair cost is reasonable

Professional diagnosis provides the information needed to make that decision.

Radio Servicing Process at Pro-Logic Technologies Limited

Our approach can be summarized as follows.

1. Customer Enquiry

Tell us the radio brand, model and problem.

2. Equipment Assessment

The radio is inspected to understand its condition.

3. Fault Diagnosis

The relevant electrical and electronic sections are tested.

4. Repair Recommendation

The required repair is explained.

5. Parts Assessment

Where components are required, compatibility is considered.

6. Repair

The identified fault is addressed.

7. Testing

The radio is tested after repair.

8. Final Handover

The equipment is returned after confirming its operational condition.

Radio Servicing in Nairobi CBD

Customers in Nairobi CBD and surrounding areas can contact Pro-Logic Technologies Limited for radio-related electronic repair enquiries.

Our workshop is listed in Nairobi at Kangari Building, 3rd Floor, KA7, Luthuli Avenue. Pro-Logic Technologies limited

For enquiries, call:

0723 763 173

Radio Repair Near Nairobi CBD

If you are searching online for:

Radio repair near me
Radio servicing near me
Radio technician Nairobi
Radio repair Nairobi CBD
Radio electronics repair Nairobi
AM/FM radio repair Nairobi
Portable radio repair Nairobi
Radio amplifier repair Nairobi
Radio speaker replacement Nairobi
Radio PCB repair Nairobi

Pro-Logic Technologies Limited provides a point of contact for electronics repair and technical servicing.

Radio Servicing in Westlands

Customers from Westlands and nearby areas can arrange radio repair assessment.

The fault may involve the radio's electronic circuits, audio system, power supply or controls.

Professional diagnosis is recommended before purchasing replacement equipment.

Radio Repair in Kilimani

Radio and audio equipment users in Kilimani can seek professional electronic diagnosis when equipment develops faults.

Whether the problem is power-related, audio-related or associated with reception, the first step is to identify the affected circuit.

Radio Repair in Lavington

Older radios in residential properties can often develop faults through age and component deterioration.

A technical inspection can establish whether restoration or replacement is more practical.

Radio Repair in South B and South C

Customers in South B, South C and surrounding Nairobi neighborhoods can contact Pro-Logic Technologies Limited for radio servicing enquiries.

Radio Repair in Kasarani

Radio equipment used in homes, businesses and institutions in Kasarani can be assessed for electronic faults.

Common service requirements include power repair, audio repair, speaker problems and PCB troubleshooting.

Radio Repair in Embakasi

Radio servicing can cover both simple and complex electronic faults.

Customers can provide the equipment model and describe the symptoms before bringing the unit for assessment.

Radio Repair in Umoja

A radio that has suddenly stopped working may have a power or circuit-board problem.

Diagnosis can determine whether repair is practical.

Radio Repair in Karen

Customers seeking radio servicing in Karen can contact Pro-Logic Technologies Limited for repair enquiries and technical assessment.

Radio Repair in Rongai

Radio equipment used in Rongai homes and businesses can be assessed for faults affecting sound, power, tuning or reception.

Radio Repair in Kiambu Road and Surrounding Areas

Customers outside the immediate CBD area can contact us to discuss the equipment and repair requirements.

Service arrangements depend on the equipment and type of repair required.

Radio Servicing for Audio Electronics

Radio repair often overlaps with broader audio-electronics servicing.

Technicians working on radio equipment may also encounter:

Amplifier circuits
Speakers
Audio inputs
Power supplies
Signal-processing circuits
Connectors
Controls

This makes electronic troubleshooting particularly important.

Radio and Amplifier Repair

If the radio includes an integrated amplifier, the amplifier stage should be tested alongside the receiver.

If the amplifier is faulty, the radio may still receive a station but fail to reproduce the audio correctly.

Radio and Speaker Fault Diagnosis

Testing the speaker independently can help determine whether the problem is mechanical or electronic.

A defective speaker should not automatically lead to replacement of the radio.

Likewise, a good speaker connected to a failed amplifier will not solve the problem.

Radio Circuit Board Troubleshooting

PCB-level troubleshooting requires technical knowledge and appropriate test equipment.

The technician may inspect:

Supply rails
Component values
Continuity
Solder joints
Short circuits
Signal paths
Semiconductor components

The objective is to isolate the defective area.

Radio Soldering and Connection Repair

A radio may stop working because of a cracked solder joint or broken wire.

Such faults can occur because of:

Age
Vibration
Heat
Mechanical stress
Repeated use

Resoldering or repairing the connection can sometimes restore operation.

Intermittent Radio Faults

Some of the most difficult faults are intermittent.

The radio may work normally for several minutes and then stop.

Possible causes include:

Cracked solder joints
Thermal faults
Loose connectors
Failing components
Power instability
Mechanical controls

These faults may require extended testing to reproduce the symptom.

Radio Overheating

Excessive heat can indicate an electrical problem.

Possible causes include:

Overloaded component
Short circuit
Failed regulator
Amplifier fault
Poor ventilation
Power-supply problem

Continuing to operate severely overheating equipment can cause additional damage.

Radio Repair and E-Waste Reduction

Repairing electronic equipment can extend its useful life and reduce unnecessary disposal.

Instead of immediately discarding a faulty radio, customers can have it assessed.

If the equipment is technically and economically repairable, restoration can keep it in service for longer.

Radio Servicing for Sentimental Equipment

Some radios have personal or family significance.

A radio inherited from a relative or used for many years may have value beyond its purchase price.

In such situations, restoration can be more meaningful than replacement.

The repair strategy can be discussed based on the desired level of restoration.

Radio Repair Enquiry

When contacting us, provide as much information as possible.

For example:

Radio brand: Sony
Model: [model number]
Fault: Powers on but no sound
Location: Nairobi
History: Fault started after power interruption

A photograph of the radio and model label can also help identify the equipment.

Why Customers Should Choose Professional Radio Servicing

Professional servicing offers several advantages.

Accurate Diagnosis

Testing helps identify the real source of the problem.

Reduced Unnecessary Replacement

A repair may be possible without replacing the entire unit.

Component-Level Expertise

Electronic faults can sometimes be addressed directly on the circuit board.

Improved Reliability

Properly completed repairs can restore normal operation.

Technical Assessment

Customers can make informed decisions about whether repair is worthwhile.

Radio Maintenance Advice

To help prolong the life of your radio:

Keep it away from moisture.
Avoid excessive heat.
Use the correct power supply.
Do not overload the speaker.
Avoid dropping portable units.
Keep ventilation openings clear.
Do not force tuning controls.
Avoid using damaged charging cables.
Have unusual noises investigated.
Address power problems early.

Good operating practices can reduce avoidable damage.

When Should You Bring a Radio for Repair?

Consider professional inspection when:

The radio stops powering on.
Sound becomes distorted.
Reception becomes unusually weak.
Controls become intermittent.
The radio overheats.
The charging system fails.
The speaker begins rattling.
The radio produces unusual smells.
It has been exposed to water.
It was affected by a power surge.

Early assessment can sometimes prevent further component damage.

Frequently Asked Questions About Radio Servicing in Nairobi

Do you repair radios in Nairobi?

Pro-Logic Technologies Limited provides electronics repair and servicing enquiries for radio and related audio equipment in Nairobi.

Can an old radio be repaired?

Many old radios can be assessed for repair. The feasibility depends on the condition, design and availability of suitable components.

Can you repair a radio with no power?

Yes, the power circuit can be investigated to determine whether the problem is caused by the switch, fuse, supply circuit, wiring, PCB or another component.

Can you repair a radio with no sound?

The audio path, speaker, amplifier and related circuits can be tested to identify the fault.

Can you repair FM reception problems?

FM reception faults can be investigated through inspection of the antenna, tuner and relevant signal-processing circuitry.

Can you replace a damaged radio speaker?

Speaker replacement may be possible where a compatible replacement is available.

Can you repair radio circuit boards?

Component-level PCB troubleshooting and repair can be considered depending on the board and nature of the fault.

Can rechargeable radios be repaired?

Yes. Charging circuits, batteries, connectors and related power-management components can be assessed.

Do you service vintage radios?

Vintage radios can be assessed for restoration or repair depending on their condition and technical requirements.

How much does radio repair cost in Nairobi?

There is no universal price. The cost depends on the fault, model, parts and labour involved. An assessment is recommended before quoting substantial repair work.

Should I bring the radio or send pictures first?

For an initial enquiry, photographs showing the radio, model number and fault can be useful. The equipment may then need physical inspection for accurate diagnosis.

Contact Pro-Logic Technologies Limited for Radio Servicing in Nairobi

If your radio is no longer operating correctly, do not assume that it must be replaced.

A proper electronic assessment can determine whether the problem is repairable.

Pro-Logic Technologies Limited provides technical repair services for electronic equipment and can assess radio-related faults involving power, audio, reception, controls, speakers and circuit boards.

Contact Details

Company: Pro-Logic Technologies Limited
Radio Servicing Nairobi: Professional diagnosis and repair
Phone: 0723 763 173
Location: Kangari Building, 3rd Floor, KA7, Luthuli Avenue, Nairobi
Website: prologictechnologies.co.ke
Email: info@prologictechnologies.co.ke

Call or contact us with your radio model and describe the problem you are experiencing.

Radio Servicing Nairobi – Get Your Equipment Assessed

Whether your radio has stopped powering on, produces distorted sound, has weak reception, cannot tune stations, has a damaged speaker or has developed a circuit-board fault, professional diagnosis is the sensible starting point.

Pro-Logic Technologies Limited provides electronics repair solutions for customers in Nairobi looking to extend the useful life of their equipment.

For radio servicing in Nairobi, call 0723 763 173 and discuss your repair requirement with Pro-Logic Technologies Limited.