Aucma TVs, popular budget Chinese brands in Nairobi, display universal Chinese LED/LCD error codes via LED blinks, on-screen messages, or service menus. These codes signal power supply faults, mainboard failures, and T-Con issues common in Luthuli Avenue purchases.

By Pro-Logic Technologies › 0723763173
Pro-Logic Technologies repairs 95% of Aucma models (32-55″ HD/Full HD) onsite, stocking mainboards, power supplies, and T-Con boards for same-day restorat
Aucma TVs, popular budget Chinese brands in Nairobi, display universal Chinese LED/LCD error codes via LED blinks, on-screen messages, or service menus. These codes signal power supply faults, mainboard failures, and T-Con issues common in Luthuli Avenue purchases.
By Pro-Logic Technologies › 0723763173
Pro-Logic Technologies repairs 95% of Aucma models (32-55″ HD/Full HD) onsite, stocking mainboards, power supplies, and T-Con boards for same-day restoration.
Common Aucma Error Codes & Fixes
LED Blink Codes (Red Light Patterns at Bottom)
-
1 Blink
Power Supply Fault: Missing 5V standby.
Fix: Replace 4007 diodes or STR-X6059 IC (KSh 1,500). 80% resolution. -
2 Blinks
No +12V Supply: Main power rail failure.
Fix: Recheck X capacitor (105/400V), replace power board (KSh 2,500). -
3 Blinks
Audio IC Protection: TDA or R2A amplifier short.
Fix: Lift audio IC pins, bypass with resistors, or swap mainboard (KSh 4,000). -
4 Blinks
Backlight Failure: LED strips open circuit.
Fix: Series LED tester confirms dead strings—replace strips (KSh 3,500, 32″). -
5 Blinks
T-Con Board Error: LVDS cable or timing controller fault.
Fix: Reseat ribbon cables, swap T-Con (KSh 2,000). Common on 40″ panels. -
6 Blinks
DDC Communication: EEPROM read failure.
Fix: Reflash mainboard firmware via USB (Menu 1147 service code). -
7 Blinks
Horizontal Output: Jungle IC protection (CRT legacy).
Fix: Check 8V line capacitors, replace TDA11105PS (rare). -
Continuous Blinks
Overcurrent Protection: Short across 24V rail.
Fix: Component-level trace—usually power FETs or electrolytic caps.
On-Screen Error Codes (Service Menu Accessible)
-
Error 101
Network Timeout: Wi-Fi module disconnect.
Fix: Service Menu (Menu 1147) → Reset Network Adapter. -
Error 202
No HDMI Signal: EDID handshake failure.
Fix: HDMI IC reset, port cleaning, firmware update. -
Error 301
HDMI Port Fault: Specific port dead.
Fix: Bypass HDMI switch IC, direct routing to scaler. -
Error 404
Firmware Corruption: Flash memory error.
Fix: USB recovery using universal Chinese firmware (FAT32). -
Error 501
Hardware ID Mismatch: Panel/mainboard incompatibility.
Fix: EEPROM rewrite matching panel timing (Pro-Logic exclusive).
Service Menu Access Codes (China Universal)
Enter via remote sequences—no model-specific variation:
Access: Info > Menu > [Code] > OK (power cycle to exit).
Pro-Logic Repair Costs (Aucma Specific)
Warranty: 6 months. Free pickup Luthuli/Westlands.
Why Pro-Logic for Aucma Repairs
-
Stocked Parts: Mainboards for Aucma 32D2008, 40S4008, 43S5009.
-
Universal Tooling: JTAG programmers handle Chinese MTK/RTD chipsets.
-
Nairobi Coverage: 2-hour response Industrial Area to Karen.
-
No Import Delays: Local sourcing vs. 14-day China shipping.
Common symptoms FIXED: Blank screen (heater ON), no remote response, sound OK/no picture, intermittent power. Aucma’s generic boards share 90% Chinese architecture—Pro-Logic’s multi-brand expertise applies directly.
Dial 0723763173 for Aucma diagnostics. WhatsApp model/sticker photo for instant quote. prologictechnologies.co.ke – Luthuli’s Aucma specialists.